(321) 610-8977

Testo 880-3 Thermal Infrared Camera Rentals:
3 day IR Camera Rental Period

• High quality wide angle lens 32 with F1 optics
• Image refresh rate 33 Hz
• Detector 160 x 120
• interpolated to 320 x 240
• (NETD) <0.1C
• Built-in digital camera with power LEDs
• Dynamic motor focus
• Manual focus
• Minimum focus distance of 10 cm
• Data storage device SD-1GB for approx. 600-1000 images
• IR software with integrated report creation
• USB cable
• Li-Ion battery
• SD card
• AC Adapter
• Adapter plate for tripod mounting
• High-quality, robust case
• Exchangeable lenses
• Display of surface moisture distribution
• Lens protection glass included


The Testo 880 Thermal Infrared Camera Rental series of infrared cameras feature outstanding image quality, accurate temperature measurement (+/-2C or 2% accuracy), quality construction and a wide range of accessories. With your first touch youll recognize the exceptional quality and attention to detail; this is a precision instrument! The Testo 880 thermal imaging rentals is very easy to use and features motorized focus for real one hand operation. The camera also features a 5 hour battery, removable image storage card, optional lenses and an optional protective lens shield for dirty environments. A digital video output enables you to continuously or remotely monitor critical equipment. If youve decided to rent a high quality infrared camera be sure to check out the Testo 880 Infrared Camera.

Applications For Infrared Camera Rentals:

• Electrical Apparatus Inspection

Visually inspect electrical systems for a wide range of problems including loose connections, corroded elements, load imbalance, short circuits and other potentially dangerous faults that typically create heat. Abnormal heating associated with high resistance or excessive current flow is a primary indicator of many problems in electrical systems. Thermal imaging enables you to see the invisible thermal radiation that may portend impending damage before their condition becomes critical. When current flows in an electrical circuit, part of the electrical energy is converted into heat due to the inherent resistance in all conductive elements. The existence of abnormally high resistance in the circuit or high current flow will result in abnormally high levels of heat to be generated that can be quickly identified with a thermal imager avoiding potential damage to equipment or danger.

• Mechanical Inspection

Survey a wide range of mechanical systems such motors, pumps and other type of rotating equipment for lubrication, alignment and cooling problems. Thermal imaging is ideal for low speed rotating equipment inspection such as conveyors and other material handling systems that may not be an inspection point for vibration and oil analysis inspection programs. Other uses of thermal imaging include identifying fluid levels in containers, steam trap inspection and insulation performance.

• Energy Audits

Thermal imaging can be used to validate the performance and quality of insulation in homes and commercial buildings. With the ever-increasing costs of heating, the return on investing in an energy audit and subsequent repairs becomes more and more compelling. Many homeowners today request thermographic inspection services as part of the overall home inspection program.

• Process Monitoring

Temperature is the most measured parameter in many process control systems. Thermal imaging provides for an accurate, non-contact temperature measurement technique and a real-time two-dimensional view of a wide range of process control applications including web-based applications such as paper, glass, plastic, thermoforming and sheet metals. Other on-line applications include food processing, packaging, molding and many others.

• Roofing Inspection

Thermal imaging of flat roof systems is an extremely cost effective technique for evaluating the integrity of a wide range of built-up roofs and for ultimately reducing the cost of roof maintenance and repair. Proper maintenance must begin even before leaks are evident inside the building since surface damage to the outer membrane can cause water to be absorbed into sub-surface insulation layers. The amount of retained water can be significant and result in major structural deterioration near the leak location as well as to otherwise healthy roof areas. Thermal imaging techniques quickly locate the areas where retained moisture is trapped in subsurface insulation allowing immediate targeted repair of only the damaged areas. By exploiting the differences in thermal capacitance of moist and dry roof areas, retained moisture in these roof systems can be quickly located.

• Mold and Moisture Detection

There has been an increased awareness of the danger of mold in homes, office buildings and schools and the resulting health impact on individuals. The effect of mold on health is dependent upon the concentration of spores in the immediate area and the allergic reaction to the individual. Potential health problems associated with mold exposure can take the form of allergic reactions or asthma. In addition to incidental moisture egress, the near catastrophic impact of flooding on commercial buildings has created an entire remediation industry. Thermal imaging permits building owners and insurance companies to identify the extent of water damage, and, by delivering rapid drying or remediation services, to save in building restoration.

Testo 880-3 Specifications:

• Optical field/min. focus distance 32° x 24° / 0,1 m (standard lens), 12° x 9° / 0,6 m (telephoto lens)
• Thermal sensitivity (NETD) <0,1 °C at 30 °C
• Geometric resolution 3,5 mrad (standard lens), 1,3 mrad (telephoto lens)
• Image refresh rate 33 Hz
• Focus manual + motorized
• Detector type FPA 160 x 120 pixels, a.Si, temperature-stabilized
• Spectral range 8 to 14 µm
• Visual
• Optical field/min. focus distance 33,2° x 25,2° / 0,4 m
• Image size 640 x 480 Pixel
• Image refresh rate 8 ... 15 Hz
• Image presentation
• Image display 3.5"" LCD with 320 x 240 Pixel
• Display options IR image only / real image only / IR and real
• Spot Marker auto hot spot/cold spot marker and temperature readout
• Video output USB 2.0
• Video stream 25 Hz
• Colour palettes 8 options
• Measurement
• Temperature range minus 20° to +100 °C 0 to +350° C Switchable
• Accuracy ±2 °C, ±2% of mv
• Minimum diameter measurement point 3 x 3 pixels: standard 10 mm at 1 m (standard lens), standard 4 mm at 1 m (telephoto lens)
• Switch-on time 40 s
• Measurement funtions Standard measurement (2-point)
• Reflected temperature compensation Manual
• Setting emissivity Nine materials programmable, of which one user-defined (0.01 - 1.0)
• Image storage
• File format .bmt; export possibility to in .bmp, .jpg, .csv
• Data storage device SD Card
• Store capacity 1 GB (approx. 800-1,000 images)
• Optics
• Standard lens (32°) Yes
• Telephoto lens (12°) Optional
• Battery type Fast charging, Li-ion battery, changeable on site
• Operating time approx 5 h at 20 °C
• Charging options in instrument/charger (optional)
• Mains operation yes
• Output voltage 5V/4A
• Ambient conditions
• Operating temperature range -15 to +40 °C
• Storage temperature range -30 to +60 °C
• Air humidity 20 % to 80 % non-condensing
• Protection class of housing IP54
• Physical characteristics
• Weight 900 g (1.98 lbs)
• Dimensions 152 x 106 x 262 mm
• Tripod mounting yes
• Housing ABS, diecast zinc
• PC software
• System requirements Windows XP (Service Pack 2), Windows Vista, interface USB 2.0
• Warranty 2 years

Old Files

AIT Rental Agreement

AIT Infrared Rental Brochure

testo_880_Instruction_Manual

testo_880_Quick_Start

testo_880_Software_Manual